TUBULAR FURNACE
MAKE DINESH SCIENTIFIC MODEL DS-TF-1400
PRODUCT DESCRIPTION
Tubular furnaces are designed for sample testing under gas/vacuum atmosphere they are available in customize size and options with water cooled flange. Maximum design temperature of furnace . The high-grade insulation materials guarantee low energy consumption and high heating rates due to their low thermal conductivity. Three-zone tube furnaces can achieve better temperature uniformity than single-zone versions. In these models each zone is equipped with a dedicated thermocouple and controller, which is especially useful to preheat gases required for reactions inside the system.
WORK OF TUBULAR FURNACE:
The tube furnaces TF do not include an integral work tube. The work tube must be selected as an additional item. The work tube length is dependent on the application and will vary if used with or without modified atmosphere or vacuum.
VARIOUS APPLICATION OF TUBULAR FURNACE:
The Various applications includes ageing, annealing, brazing, calcination, catalyst research, CIM, coating, CVD, degassing, drying, hardening, MIM, miniplants, pyrolysis, sintering, soldering, sublimation, synthesis, tempering, test fuel cells, thermocouple calibration Tempsens is ISO and CE certified Laboratory & Industrial furnace manufacturers and suppliers. Tempsens has wide range of tubular furnaces with different tube sizes
TECHNICAL DATA:
| PARAMETER | VALUE |
| Working Temp {°C ) | 1400 |
| Hot Zone Size (mm) | ID: 80, L: 300 |
| Uniform Hot Zone Length | 100 |
| Availability in Horizontal and Vertical Configuration | Horizontal |
| Control Zone | Single |
| Construction in Steel with Anti Corrosion Coating | Dual Body Fan Cool ing |
| Work Tube | Replaceable |
| Work Tube Type | Alumina 95%, 90 x 80 x 1000,
Quartz 90 x 85 x 1000 |
| Insulation | Non Carcinogenic Fiber insulation |
| Heater Type | Free radiating |
| Heater | SiC |
| SS Flange for Gas Purging + High Vacuum | SS Flange with K F 25 port for vacuum connection . It will have analog gauge for vacuum measurement upto 760mm Hg. Flange will have hinge type door at material entry side and has 1/4″ push fit ports with ball valves for gas entry and exit. Different flanges for Quartz and Alumina Tube |
| Ceramic Fiber Radiation Shield for use with Alumina Tube | Radiation Shield for gas purging application |
| Quartz Radiation Shield for use with Quartz Tube | Radiation Shield for gas purging application |
| Avg. Rate of Heating | 3 deg C/ Min with Alumina Tube and 10 deg C/m i n with quartz tube |
| Thermocouple Type TC Protection Sheath | R Ceramic Sheath |
| Control Panel | Programmable Controller with self diagnostic feature loT compatible I enabled. In built removable SDHC Memory Card based Data Logger Alphan umeric four l ine backl it LCD screen. Robust feather-touch keypad PC Visual ization and control software RS485 Communications Port, Ethernet Communications Port Three (3) Limit Switches configuration. In built Thyristor Triggering, Phase angle fired Soft Start Soft Stop, Power Tuned , Solid State Relay. Step Down xformer, Special Thyrister |
| Self Diagnostic features | Thermocouple fault detection Under voltage detection/protection Over voltage detection/protection Over current detection/protection Thyristor fault detection Heater filament fault detection Power Transformer fault detection |
| Spares | Sample placementrod |
| Safety Features | TC Break Over Current |
| Stand | Horizontal stand for keeping extra quartz tube |
Reviews
There are no reviews yet.