REFRIGERATED SHAKING INCUBATOR
MAKE DINESH SCIENTIFIC MODEL DS-OSI-400
PRODUCT DESCRIPTION
Shaking incubators, also known as environmental shakers, are often used for cell culturing, cell aeration, and solubility studies. In addition to stable temperature conditions, they use an orbital agitation at variable speeds to affect the growth of cell cultures. Orbital Shaking Incubators have adjustable speed and orbit to meet each application. Models can equipped with a universal shaking platform, or fixed flasks. Independent alarms, and PLC based controls for temperature and speed adjustment
SAILENT FEATURES:
SAFETY
- Temperature Overshoot/Undershoot
- Humidity Overshoot
- Low water-level
- Delay Timer to safeguard the Compressor
- MCB to cut-off over-current supply
- Standby Controlling Sensor upon failure of Primary
- In Walk-in chambers door can be open from inside
- Emergency Bell switch inside the Chamber
STAND BY HUMIDITY & COOLING SYSTEM:
- Completely ready-to-use systems
- Switch-over also upon detection & Internal fault
- Scheduled & manual change-overs
- Recording of all change-overs in the software
SCOPE OF APPLICATION:
Specially designed for Orbital Shaking under controlled Incubations / Temperature required for Tissue Cultures Fermentation Studies, & Ageing Tests., Life science applications & growth studies. Applications required in fermentations studies, enzyme reactions, life sciences, tissue culture and biotechnology, research labs.
CHARACTERISTICS OF INCUBATOR SHAKER:
Some of its characteristics are that it does not create vibrations, and it produces low heat compared to other kinds of shakers, which makes it ideal for culturing microbes. Moreover, it can be modified by placing it in an incubator to create an incubator shaker due to its low temperature and vibrations.
USE IN LABORATORY:
Laboratory shakers do just that—-shake the mixtures that are placed on them. Plates vibrate back and forth or circularly to mix the components. Some laboratory shakers have plates that tilt up and down as well as side to side for an added mixing element.
Laboratory Products | Orbital Shaking Incubator. Orbital Shaking Incubators are designed for precise temperature control and simultaneous shaking applications required in fermentations studies, enzyme reaction s, life sciences, tissue culture and biotechnology, research labs.
TECHNICAL DATA:
| PARAMETERS | VALUES |
| MAKE | DINESH SCIENTIFIC |
| MODEL | DS-RSI-400 |
| TYPE OF INCUBATOR | Benchtop model and will be stackable with the same type |
| CONTROLLER | Microprocessor controlled and multi step programmable machine with screen to view the various setting parameters |
| Upgrading the system | Suitable interface for integrating the unit to computer for upgrading the system for remote controlling through software |
| Programming STATUS | For multistep programming for timed shaking |
| TYPE OF chamber | Illumination |
| TYPE OF MOTOR | Brushless DC Motor Drive with permanently lubricated bearings |
| Shaking speed | 50-400 rpm |
| Orbit Throw | 2.5 -3 cm |
| Speed Accuracy | ±1 RPM |
| Temperature RANGE | 10°C- 60 °C |
| Temperature Accuracy | ± 0.20°C |
| Refrigerant | Compressor with CFC free refrigerant |
| Power failure restart | Non Volatile memory |
| Tray | Tray rack for storing petri-plates |
| Type of built | Built in drain |
| Universal Shaking Platform | 45-50cm X 45-50 cm |
| Safety features | Open door cutout switch
Audible and visual alarms for temperature fluctuations Out of balance sensor |
| Power Supply | 220/230 V AC, 50/60 kHz Supply |
ACCESSORIES:
- Universal Shaking Platform (Grooves to tight the clamps will be there/ No sticky pad platforms are required) – 01 Nos
- 5/6 Litre Clamp for conical flasks – 2 Nos
- 2 Litre Clamp for conical flasks -2 Nos
- 1Litre clamp for conical flasks – 4 Nos
- 500ml clamp for conical flasks – 6 Nos
- 250 ml clamp for conical flasks -10 Nos
- OOml clamp for conical flasks -10 Nos
- 50 ml clamp for conical flasks -10 Nos
- 25 ml clamp for conical flasks -10 Nos
Reviews
There are no reviews yet.