JAW CRUSHER

Make Dinesh Scientific

DESCRIPTION:

When crushing hard, abrasive materials, a jaw crusher is the primary crusher that is used. Put simply, it’s a device that uses an oscillating jaw set on a pivoting shaft to break up rock or ore into smaller pieces. An overview of the main parts and operation of a jaw crusher is provided here. Jaw Crusher: a powerful jaw crusher with a big handling capacity and a high crushing ratio. Jaw Breaker Provide zero-point correction to make up for wear and process rough, brittle, medium-hard, and hard samples quickly and gently while maintaining the highest standards of technical and safety performance. Carbide tungsten jaw plates. The device is helpful for both mid-range and coarse primary crushing as well as for crushing. Minimal operating noise and no dust pollution were produced. Jaw Breaker high crushing efficiency, steady operation, and consistent output size. The particulars are listed below.

PARTS:

FIXED JAW: The crusher frame’s fixed jaw is a fixed component that never moves. It functions as the moving jaw’s mounting base.

MOVEABLE JAW: The moveable jaw rotates around the eccentric shaft to which it is attached. Crushing the material delivered into the crusher chamber, it oscillates back and forth against the stationary jaw.

STRANGE SHAFT: A shaft that passes through the crusher’s frame is called the eccentric shaft. It moves the movable jaw in an elliptical pattern since it is attached to it.

SWITCH PLATE: The mechanism known as the toggle plate aids in transferring the eccentric shaft’s motion to the moving jaw. Additionally, it functions as a fuse and breaks if an excessive amount of force is applied, providing a safety mechanism in the event of an overload.

SET OF ADJUSTMENTS: The size of the crushed material can be controlled by adjusting the discharge hole size using this set. Toggle plates, toggle seats, and tension rods are usually included.

FLYWHEEL: To aid in smooth operation, the flywheel is a heavy wheel designed to store energy during the crushing cycle’s idle phase and send it to the crushing action during the working half.

SHIM OR WEDGE: These are employed to regulate the size of the crushed material by adjusting the space between the movable and fixed jaws.

FUCTION:

All Shaft fitted on Sutaible roller/ball bearing and toggle clamp mounted on electric shaft eith gun metal/mterial,Protection when any unreakable material get into feed,System designed such a way that collection of smallest sample possible without loss,All crushing part cleaned easily after processing each cample without tool,Coompleter enclosed outer body finished with powder paint sutaible for easy cleaning,consist one set of completer collction unit

TECHNICAL DETAILS: