Simple, hardwood comprising, cut-away base to allow cord to hang freely and hinged plane 60 x 7.5 cm. with aluminium pulley 28 mm. diameter, and stepped lower face to accommodate wood block for setting at angles between 24 and 45 deg. Approximately with cylindrical metal roller and scale pan.
Simple, hardwood comprising, cut-away base to allow cord to hang freely and hinged plane 60 x 7.5 cm. with aluminium pulley 28 mm. diameter, and stepped lower face to accommodate wood block for setting at angles between 24 and 45 deg. Approximately with cylindrical metal roller and scale pan.
It is a class room demonstration kit for qualitative investigation of nature of mass and making students understand distinction between mass and weight.
Kit comprises two metal trays 130 x 50 mm held 200 mm apart approximately on spring steel strips attached to the sides. One tray has holes to take three equal mass cylinders approximately (L x D) 100 x 25 mm each. The other tray acts as anchor and may be clamped to the bench either horizontally or vertically. Three support pins are supplied to fit radial holes in cylinders. Supplied complete with G clamp for mounting.
It is a class room demonstration kit for qualitative investigation of nature of mass and making students understand distinction between mass and weight.
Kit comprises two metal trays 130 x 50 mm held 200 mm apart approximately on spring steel strips attached to the sides. One tray has holes to take three equal mass cylinders approximately (L x D) 100 x 25 mm each. The other tray acts as anchor and may be clamped to the bench either horizontally or vertically. Three support pins are supplied to fit radial holes in cylinders. Supplied complete with G clamp for mounting.
Consists of a graduated meter rule with fulcurm, figured 50-0-50cm balanced and fitted into a grooved wooden stand with hangers supplied without weights.
Consists of a graduated meter rule with fulcurm, figured 50-0-50cm balanced and fitted into a grooved wooden stand with hangers supplied without weights.
This kit helps students understand the concept of moments and principle of lever..
It comprises of 5 plywood beams 600 x 45 x 3 mm graduated at 38 mm intervals, and with a groove across its centre to locate the fulcurm point. Also supplied with four fulcurms 32x32x64mm and 40 metal blanks 25mm square.
This kit helps students understand the concept of moments and principle of lever..
It comprises of 5 plywood beams 600 x 45 x 3 mm graduated at 38 mm intervals, and with a groove across its centre to locate the fulcurm point. Also supplied with four fulcurms 32x32x64mm and 40 metal blanks 25mm square.
The Linear Air Track is designed for the study of linear motion under practically frictionless conditions.
.
It is used in experiments and demonstrations of topics such as: Newton’s Law, kinetic and potential energy, collisions, oscillatory motion, velocity, acceleration, conservation of momentum, motion on an inclined plane, conservation of mechanical energy, simple harmonic motion.
It is constructed from an extruded aluminium-alloy section, 2.25m long with equally spaced air holes. Two adjustable feet facilitate simple levelling. Two rows of fine holes provided on each side all along the length of the track through which jets of the air emanate to form air cushion on which the vehicles float under virtually frictionless conditions.
Linear Air Track is supplied complete with following accessories:
2 large vehicles (mass 400g, length 215mm)
1 small vehicle (mass 200g, length 100mm)
2 magnetic buffers (25mm diameter)
2 Plasticine holders (20mm diameter) with central hole
4 catapults (45mm wide) with slot for elastic band
3 steel buffers with central hole
4 elastic cords (220mm long) with plastic rings
1 reel of nylon thread
2 white plastic rods (4mm diameter 150mm long) for stroboscope photography
24 needles for use with steel buffer
20 white plain cards for interrupting light beams
1 reel rubber stand
1 pack of Plasticine
20 elastic bands
Air Blower is designed specifically to be used with the Air Track, Supplied complete with hose, adaptor and mains lead. Operates on 220-240V AC mains, 50/60Hz.
The Linear Air Track is designed for the study of linear motion under practically frictionless conditions.
.
It is used in experiments and demonstrations of topics such as: Newton’s Law, kinetic and potential energy, collisions, oscillatory motion, velocity, acceleration, conservation of momentum, motion on an inclined plane, conservation of mechanical energy, simple harmonic motion.
It is constructed from an extruded aluminium-alloy section, 2.25m long with equally spaced air holes. Two adjustable feet facilitate simple levelling. Two rows of fine holes provided on each side all along the length of the track through which jets of the air emanate to form air cushion on which the vehicles float under virtually frictionless conditions.
Linear Air Track is supplied complete with following accessories:
2 large vehicles (mass 400g, length 215mm)
1 small vehicle (mass 200g, length 100mm)
2 magnetic buffers (25mm diameter)
2 Plasticine holders (20mm diameter) with central hole
4 catapults (45mm wide) with slot for elastic band
3 steel buffers with central hole
4 elastic cords (220mm long) with plastic rings
1 reel of nylon thread
2 white plastic rods (4mm diameter 150mm long) for stroboscope photography
24 needles for use with steel buffer
20 white plain cards for interrupting light beams
1 reel rubber stand
1 pack of Plasticine
20 elastic bands
Air Blower is designed specifically to be used with the Air Track, Supplied complete with hose, adaptor and mains lead. Operates on 220-240V AC mains, 50/60Hz.
Made of iron, chrome plated. This set includes nine slotted masses each of 50 g with a 50 g wire hanger making total mass of 500 g; masses do not fall off when assembled in a set. Tolerance 3%.
Also available in 1000g.
Made of iron, chrome plated. This set includes nine slotted masses each of 50 g with a 50 g wire hanger making total mass of 500 g; masses do not fall off when assembled in a set. Tolerance 3%.
Also available in 1000g.
Made of steel. This set includes nine slotted masses each of 50 g with a 50 g wire hanger making total mass of 500 g; masses do not fall off when assembled in a set. Tolerance 3%
Made of steel. This set includes nine slotted masses each of 50 g with a 50 g wire hanger making total mass of 500 g; masses do not fall off when assembled in a set. Tolerance 3%
Comprises quite a variety of materials in the form of rectangular blocks.
This kit is used to familiarizes the students with appearance, feel, Texture, hardness and density of a range of common substances.
Comprises quite a variety of materials in the form of rectangular blocks.
This kit is used to familiarizes the students with appearance, feel, Texture, hardness and density of a range of common substances.
Hollow brass tube graduated with scale and vernier, fitted with small chunk and mirror, 2 solid and 2 hollow cylinders to perform experiments on rigidity.
Hollow brass tube graduated with scale and vernier, fitted with small chunk and mirror, 2 solid and 2 hollow cylinders to perform experiments on rigidity.
