REFRIGERATED INCUBATOR SHAKER
MAKE DINESH SCIENTIFIC MODEL DS-OSI-400
PRODUCT DESCRIPTION
Shaking incubators, also known as environmental shakers, are often used for cell culturing, cell aeration, and solubility studies. In addition to stable temperature conditions, they use an orbital agitation at variable speeds to affect the growth of cell cultures. Orbital Shaking Incubators have adjustable speed and orbit to meet each application. Models can equipped with a universal shaking platform, or fixed flasks. Independent alarms, and PLC based controls for temperature and speed adjustment
SAILENT FEATURES:
- Temperature Overshoot/Undershoot
- Humidity Overshoot
- Low water-level
- Delay Timer to safeguard the Compressor
- MCB to cut-off over-current supply
- Standby Controlling Sensor upon failure of Primary
- In Walk-in chambers door can be open from inside
- Emergency Bell switch inside the Chamber
SCOPE OF APPLICATION:
Specially designed for Orbital Shaking under controlled Incubations / Temperature required for Tissue Cultures Fermentation Studies, & Ageing Tests., Life science applications & growth studies. Applications required in fermentations studies, enzyme reactions, life sciences, tissue culture and biotechnology, research labs.
TECHNICAL DATA:
| PARAMETER | VALUES |
| levels | Shaker stackable 3 levels. |
| Speed range | With three stacks within +/- 1 rpm, the trembling orbit has a diameter of 26 mm and a speed range of 25–400 rpm. |
| Accuracy | ± 0.1°C at 37°C at an ambient temperature <28°C. |
| Brushless Motor | For even agitation, the brushless motor drives the shaker’s magnetic (or triple eccentric counterbalanced) drive. |
| Shaker temperature range from | Shaker temperature range from 5°C to 80°C (Ambient-20°C to 80°C) . |
| Electronic | All electrical and heating/cooling components can be easily accessed using a pull-out and front-access service module, eliminating the need to unstack the units. |
| Sticky mat | The universal platform capable of using assorted clamps; or option to use Anodized platform with Sticky mat |
| Equipment comes with multi step programmable control (Min 15 Steps), parameter changes at timed interval | |
| PLC based PID control system | PLC based PID control system with LCD display and control via HMI Touch screen. |
| window | Front open double door with large viewing window for convenient access to the platform, without disturbing the access to second or third deck when stacked. |
| Temperature control | Possible for incremental / decrement speed control of 1RPM and Temperature control of 0.1° C. |
| Interlocking stacking kit | Interlocking stacking kit arrangement for shakers as standard. |
| Dimension | Shaker minimal foot print of 1.1m2 with external dimension not exceeding 1340 x 740 x 890mm (WxHxD) and Weight of shaker not exceed 240kg per unit |
| Optional | The universal platform should hold at least 60 nos of 100ml flasks (or) 40 nos of 250ml flasks (or) 24 nos of 500ml flasks (or) 15 nos of 1000ml flasks (or) 12 nos of 2000ml flasks (or) 6 nos. of 5000ml flasks (or) 5 nos of 6000ml flasks in the universal platform and facility to hold test tube racks and micro plate holders. |
| Spring | Clamp made of single piece stainless steel material (without welding) and leaves tied with spring. |
| Door switch | Shaker come with Thermostat cut-off, door switch, non-volatile memory with automatic power failure restart. |
Reviews
There are no reviews yet.