CNC MILLING MACHINE
MAKE DINESH SCIENTIFIC MODEL DS-CNCM-700×400
PRODUCT DESCRIPTION
Unlike a drill press, which holds the workpiece stationary as the drill moves axially to penetrate the material, milling machines also move the workpiece radially against the rotating milling cutter, which cuts on its sides as well as its tip. milling machine, device that rotates a circular tool that has a number of cutting edges symmetrically arranged about its axis; the workpiece is commonly held in a vise or similar device clamped to a table that can move in three perpendicular directions.
SAILENT FEATURES:
- Smooth Operations
- Excellent Performance
- Low Maintenance
- Vertical and horizontal milling machines.
- Purely vertical machines.
- Knees and Quill feeds.
- Round columns.
- The milling table.
- Right angle drives.
- Gears and belts.
SCOPE OF APPLICATIONS:
A milling machine removes material from a work piece by rotating a cutting tool (cutter) and moving it into the work piece. Milling machines, either vertical or hori- zontal, are usually used to machine flat and irregularly shaped surfaces and can be used to drill, bore, and cut gears, threads, and slots.
FEATURES:
- Stress relieved Casting base & Column.
- Coolant Tank with Chip Tray-Front Chip disposal preferable.
- Air blast for spindle no secleaning.
- Rigid Taping
- Manual pulse generator.
- Auto tool clamp & de-clamp
- Electronic/Hydraulic Counter balancing for Vertical milling head.
- Brake motor for vertica 1 axis
- Centra lisedo illubrication for guide way sand ball screw.
- Machine lamp
- Machine Guard
TECHNICAL DATA:
| PARAMETER | VALUE |
| Clamping Area | 700x400mm |
| No. of T-slots | 3Nos. |
| loading table | 300kg |
| Longitudinal movement(X-axis) | 450mm |
| Transverse movement(Y-axis) | 350mm |
| Vertical Movement(Z-axis) | 350mm |
| Feed rate | 1-5000mm/min |
| Rapid Transverse X/Y/Z | 20/20/15m/min |
| Spindle power-Continuous | 5.5kw |
| Speed | 60-8000 rpm |
| Spindle Taper | BT-40 |
| AUTO TOOL CHANGER | |
| Type of Tool Changer | Twin Arm Type |
| No. of Tools | 20Nos. |
| Tool dia. With adjacent pocket full | 75/125mm |
| Tool length | 200mm |
| Tool Weight | 7Kg. |
| Tool changing time | 2.5Sec. |
|
ACCURACY |
|
| Positioning accuracy | 0.012mm |
| Repeatability | 0.010 mm |
| CNC System | Fanuc Oi MF Plus |
| Monitor | 10.4″Colour Monitor |
| Incremental input/output | 0. 001mm |
| Simultaneous Control axis | X,Y&Z |
| Display | Selection-Menus witchorTouch screen. |
| Back-lash | Back-lash compensation |
| Pitch error | Pitch error compensation |
| Manual pulse generator | Manual movement of axes. |
| Display of messages | On Screen. |
| Feed Hold | Stopping feed during operation. |
| USB Port | Provision RJ45 Port/USB Port for serial interface and data input/output during machining operation. |
| Memory Card | PCMCIA Memory Card |
| Graphic simulation facility | Graphic simulation facility for tool travel and feed. |
| Dry | Dry run |
| lock | Machine lock |
| Function | Block skip function |
| Block | Block search |
| Programmer | Programmer /sequence number search |
| Restart | Program me restart |
| Protection | Over load protection. |
| Count Display | Run hour/parts count display |
| Mirror | Mirror image |
| Point return | Manual reference point return |
| Co-ordinate system | Co-ordinate system setting |
| Cycle | Canned cycle |
| Feed rate override | Feed rate override to 120% insteps of 10% preferably. |
| Power failure | Program protect during power failure indenting/machine operation mode. |
| STANDARD MACHINES ACCESSORIES ALONG WITH MACHINE | |
| Operation | Operation & Maintenance Manuals |
| Tool Kit | Maintenance Tool Kit |
| Pull Studs | 20Nos. |
| Antgun | Cool antgun |
| Oil | First Fill Oil |
| Clamping Kit | Clamping Kit |
| Electrical Cabinet | A.C. Unit for Electrical Cabinet |
| Lamp | 3 Tier Lamp |
| Foundation Bolts | Leveling Pads & Foundation Bolts |
| Tools Trolley grade | Tools Trolley grade (& roller sliding)- 01 No. |
| STANDARD ADAPTORS | |
| Standard adaptors | · Adaptor BT- 40 Er-16 – 02 Nos
· Adaptor BT- 40 Er-32- 02Nos · Adaptor BT- 40 EMO – 02Nos · Stub Arbor Bt-40, 27mm- 01Nos · Stub Arbor Bt-40, 16mm- 01Nos · Stub Arbor Bt-40, 22mm- 01Nos |
|
CUTTERS |
|
| CUTTERS | · Face Milling Cutter – dia. 80MM -01No
· Face Milling Cutter – dia. 63MM -01No · Face Milling Cutter – dia. 50MM -01No · End mill cutter dia-16mm -02Nos · End mill cutter dia-25mm -02Nos · Spring Collet ER-16 (01 to 10mm) – 01set · Spring Collet ER-32 (01 to 20mm) – 01set · Spring Collet ER-40 (03 to 26mm) – 01set · For each face milling cutter & end mill cutter 10 nos of inserts (01 set) · Clamping Kit Set 01Set |
Reviews
There are no reviews yet.